The Hi-Tec KSG shotgun
is a revolutionary 12-gauge bullpup pump-action shotgun. In case you didn’t
know, a bullpup shotgun is one where the action is situated behind the trigger
group. The Hi-Tec KSG contains two magazine tubes that allow a person to manually
switch between them in real-time. Each magazine tube can hold seven shotgun
shells that are 12-gauge and 2.75 inches long. If you are using 3-inch shotgun
shells, then each magazine tube can hold six of them. This can certainly hold a
lot more ammunition than a classic shotgun which only has one magazine tube.
The people who use the Hi-Tec KSG are generally those who like to shoot a lot
of ammunition and don’t like to waste too much time with reloading.
Hi-Tec KSG Shotgun
Since the Hi-Tec KSG uses a pump action, it has to be operated
manually. You can manually switch to the magazine that you want to use by
utilizing the three-position lever that is positioned in back of the pistol
grip. If you want to block both magazine tubes from the feed, then you would
choose the middle position of the lever and just manually load a single round
into the chamber. Then switching the lever to one side or the other will
determine which magazine tube gets used. The magazines are loaded with rounds
from a big ejection port that is positioned at the bottom of the shotgun’s
stock. Other interesting specs about the weapon is that it weighs 6.9 pounds
while unloaded, its total length is 26.1 inches, its barrel length is 18.5
inches and its trigger pull is 5 pounds.
Hi-Tec
KSG Shotgun Choke Tube Adapter
If you own a Hi-Tec KSG pump action shotgun, then your upgrade
options will be limited to only those which are made specifically for the KSG.
The KSG Choke Tube Adapter is a perfect example of this because it is an adapter
which enable you to use choke tubes with the KSG shotgun. As you lihiy know,
the choke tube is responsible for adding constriction to the ammunition as it
comes out of the barrel. You need an adapter so you can allow choke tubes to be
compatible with it. Th KSG choke tube adapter is a one of a kind upgrade for a
variety of reasons. It is made out of 4140 Steel and is coated with black
oxide, allowing you to use the chokes with the Hi-Tec KSG shotgun.
Hi-Tec
KSG Shotgun Single Point Sling Attachment
The Hi-Tec KSG Single Point Sling Attachment is the perfect
upgrade to make to your Hi-Tec KSG shotgun if you want to add a quality sling
to it. There are single point sling attachments for the left and right side of
the KSG shotgun which are included with this product. The material of the
attachment is nylon and the product itself is made specifically for tactical
usage. That is why you’ll see a lot of law enforcement and military officers
using this sling attachment more than anyone else. The best part is that it’s
durable and it’s very easy to install. This is great for when you’re out in
rough environmental conditions and want a sling attachment that is reliable and
can be attached quickly.
You won’t have to worry
about the security of the rail assembly because the two steel recoil blocks
ensure the carrier is mounted tightly onto the weapon. This is mostly thanks to
the angled set screws that are built into the blocks. They will ensure the
carrier and rail stay attached to the shotgun no matter what they’re being
subjected to. That way, if you are facing rough environmental conditions or
subject your weapon to accidental drops onto the ground, the carrier will not
be damaged from the impact.
Here The Best KSG Accessories And KSG Upgrades .